Code Alarm CA 420, Руководство по установке

Страница: 8 / 13

128-6832
8 of 16
PROGRAMMABLE FEATURES:
Feature LtsFlash1X Lts Flash 2X Lts Flash 3X Lts Flash 4X Default
1. Run Time 5 Min. 10 Min . 15 Min. 20 Min. 10 Min.
2. Ign. 2 Off during start On during start On
3. Park Lights ON Flash ON
4. Tach Mode Tachless Tach Tach
8
5. Voltage Level > 0.5V B4 Start < 0.5V B4 Start > 0.5V
6. Diagnostics Off On Off
7. Start Time 0.8Sec 1.0 Sec 1.5 Sec 2.0 Sec 1.0
8. Gas/Diesel Gas Diesel 10 Diesel 15 Diesel 20 Gas
9. BTN Press 1 Press Start 2 Press Start 2 Press Start
To Program Features:
1. Turn the ignition key to the ON position.
2. Press and release the program switch 3 times.
3. Immediately turn the ignition key OFF, then back to ON.
4. Press and release the program switch 2 times
5. Use the program switch to advance to the feature that you want to change. EXAMPLE - If you need to change
programmable feature number 3, press and release the program switch 3 times in succession. The parking
lights will flash 3 times confirming that selected feature 3 can now be programmed.
7. Press The Vehicle's Brake to change the selection of the programmable feature. If you are not sure what the
setting for any feature is, press the brake one time, the parking lights will flash once or twice, etc... indicating
the features setting.
NOTE: Once you enter the feature-programming mode, do not allow more that 15 seconds to pass between
steps, or the programming will be terminated.