26
LINUS14/14D
4. OPERATION
LiNET LED indication:
- LED on
→
LiNET audio input (clock present)
- LED flashes constantly (slow) - - -
→
No LiNET audio input (clock
missing)
- LED flashes with interval (fast) - o
→
Analog fallback enabled.
Analog audio input in use (clock present).
Display indication:
If there is no clock present, the unit will switch automatically to the
selected analog signal source. Indicated with capital letter and four
stars (per channel).
RECOVER FALLBACK:
If clock is present, the LED will flash fast, LiNET source can be
recovered by pressing CH buttons 1+2.
4.1.9 Lock device
Navigate to the device overview page and select the “LOCK“
function.
Define your new password (in numbers) and confirm.
After the definition of password add it into the “CURRENT PASSWORD“
field and press “LOCK“.
Device can be unlocked by entering the pre-defined password into
the “ENTER PASSWORD“ field.
Press “UNLOCK“ to unlock the device.
4.1.10 Quick lock device
You can “QUICK LOCK“ your device anytime.
Press “STORE“ and the 1st channel “SELECTION“ button (the same
for
unlock).
Display will switch automatically to the main configuration page
and it will indicate the lock of the device with the capital letter “L”.