25
LINUS14/14D
4. OPERATION
4.1.4 Delay
Press the “DOWN” button to skip to second operation page.
Move selection field to position “D” (DELAY).
Push the encoder knob on the corresponding output channel that
you want to delay, then choose its value and confirm.
The delay is shown in ms (milliseconds).
4.1.5 Input gain
Adjust the GAIN (position “G”) of the selected channel and push to
confirm.
4.1.6 Tuning
Go to position “T” (TUNING) and push the encoder knob to enter
tuning page.
Tuning page
- Array (type in total amount of used line array elements in one hang)
- Sizing
- High Shelf
- Human EQ
- Low Boost
- Sub Sonic
Go to position “EQ” and push the encoder knob to enter FULL
PARAMETRIC EQ’s page.
Seven parametric EQs are available.
Please refer to LINUS Control operation manual for detailed
information about tuning tools.
4.1.7 Device information and display settings
Press the “DOWN” button twice
(in the main page).
4.1.8 Analog fallback
ANALOG FALLBACK can be activated as redundant analog signal for
LiNET signal source.
Select "INPUT" on the main page. Numbers indicate LiNET and letters
indicate analog fallback signal source.
Signal hierarchy:
(1) LiNET
(2) Analog