EN
G
LI
S
H
4
4) Use and maintenance of the power tool
a)
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer if used at the rate for which
it was designed.
b)
Never use the power tool if the power switch does not switch the tool on
and off properly.
Any power tool that cannot be controlled by the power switch is
dangerous and must be repaired.
c)
Unplug the lead from the wall socket or remove the battery before making
any adjustments, changing accessories or storing the power tool
. These
precautions reduce the risk of the power tool starting unexpectedly.
d)
Store power tools that are not being used out of children’s reach. Do not
allow people who are unfamiliar with the tool or these instructions to operate
the tool.
Power tools are dangerous in the hands of untrained users.
e)
Properly maintain your power tools. Check for misalignment, binding of
moving parts, broken parts or anything else which might affect the operation
of the power tool. If damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, and any accessories in accordance with these
instructions, taking into account the working conditions and the work to
be performed.
Using the power tool for a purpose other than that for which it is
intended could result in a dangerous situation.
5) Service
a)
Repairs and service should only be performed by qualified tradesmen, and
only with original spare parts.
This guarantees that the safety of the power tool
is maintained.
Safety instructions specific to spray guns
• The spray gun must not be used close to sources of ignition such as open fires,
cigarettes, sparks, electrical appliances and hot objects.
• Only use coating materials and solvents with a flashpoint above 21 °C.
• Be aware of potential hazards caused by the coating material. Follow
the instructions on the packaging of the coating material. Follow all instructions
regarding personal safety equipment.
• Use the spray gun in a well-ventilated area suited for the purpose.
•
Warning:
Never use the spray gun with any flammable liquid.
