EN
G
LI
S
H
11
15
9
20
18
12
Lower guard retracting handle
Lift the handle up to raise the guard.
Settings
Warning:
Always unplug the saw before making any adjustments or repairs.
Setting the cutting depth
1. Raise the adjustment locking knob (20).
2. Tilt the baseplate (12) to the desired cutting
depth using the scale (18) as a guide.
3. Lower the locking knob to lock
the baseplate at the new angle.
Setting the parallel guide
1. Undo the locking knob (15) by turning it
anticlockwise.
2. Set the desired width.
3. Tighten the locking lever.
Setting the bevel angle
1. Undo the locking knob (9) by turning
it anticlockwise.
2. Set the desired angle (0–45°) using
the scale (8).
3. Tighten the locking lever.
