INSTALLATION GUIDE:
1. Unscrew the wing nuts by turning counter
clockwise and remove the glass.
2. Place fix on your choosen location and screw in
the base with 3 screws.
3. Insert Bulb and tighten clockwise until it is
securely fastened.
4. Make sure the wiring is properly threaded out
the side of the fixture.
5. Replace glass then screw in the cage clockwise.
Installation of lights and electrical work may present a possible shock or fire hazard if improperly installed or used.
All
electrical work should be performed in accordance with all federal, state and local safety regulations and require proper
grounding.
All work should be performed by a certified electrician. Before starting installation, turn OFF electricity at the
main fuse or circuit breaker that controls the power to the fixture/room you are working on.
Rev. 2 (07/17)
WARNING
TEMORA NAUTICAL BULKHEAD LIGHT
INST
ALLA
TION INSTRUCTIONS
WIRING INSTRUCTIONS:
1. Strip power cord to desired length.
2. Connect the WHITE (Neutral) wire from the accessory to the
WHITE (Neutral) wire from the junction box.
3. Connect the BLACK (Live) wire from the accessory to the
BLACK (Live) wire from the junction box.
Keep children away from packaging
cocoweb.com
The information in this document is subject to change without notice.
COPYRIGHT
©
COCOWEB.COM 2017
COCOWEB.COM
13715 Alton Pkwy
Irvine, CA 92618
Phone: 1-888-783-0378
6.7
9.4
