Cocoon HE170543, Инструкция по эксплуатации, Страница: 14 / 20

14
After Sales Support
1300 663 907
Model Number
HE170543
customercare@winplus.com.au
.
Operation
Pairing
The Reversing Camera included with this System is already paired with the monitor. If you can not see
the Camera image, pair the Camera with the following steps:
1.
Turn on your vehicle and place in reverse gear. This will power the Monitor and the Camera.
2.
On the monitor:
a.
Press “Menu”
b.
Go to “Pair Camera” and select “Camera 1”
c.
Press “Parking Aid line” to confirm
d.
The unit is now in pair mode - if the monitor is able to connect with the camera, the display
will show “Pair OK”.
If no camera is found, then the display will show “Pair Fail”. If you receive a “Pair Fail” message, please
call our technical support to assist in troubleshooting.
Rotate Image
You can rotate 180 degrees of the transmitted image signal and
disable mirror imaging according to your camera install orientation.
Note: Rotate Image setting ONLY works while the camera image is
on the screen.
1.
Press “MENU”
2.
Go to “Rotate Image” by pressing “–”
3.
Press “Parking Aid Line” to enter
4.
Press “+” or “–” to adjust the imaging rotation and mirroring
5.
Press “Parking Aid Line” to confirm and exit