Cocoon HE170543, Инструкция по эксплуатации, Страница: 12 / 20

12
After Sales Support
1300 663 907
Model Number
HE170543
customercare@winplus.com.au
.
Installation
9.
Put the vehicle in reverse. If you have a clear picture, put the vehicle back in park and turn the key
to the off position. You are now ready for final steps.
10.
Use the provided Zip ties to secure wires neatly within your car.
11.
Replace the light socket back into the reverse light housing.
12.
Replace any interior panels that may have been removed to access the taillight and close your trunk
or rear hatch.
13.
Standing with the license plate in one hand and the Camera in the other hand, slide the License
Plate Mount Adapter along the top of the license plate in order to determine the placement. Best
placement is in the center of the license plate. If you have a rear hatch handle you may need to
remove the adapter bracket, turn the bracket upside down and reattach to the adapter. You would
then mount the Camera from the bottom of the license plate.
14.
Peel off the lining of the double-sided tape already attached to the adapter and press firmly to the
license plate to secure the adapter. Make sure the back of the license plate is clean before attaching
double-sided tape.
NOTE: Ensure you do not obscure any part of your license plate
15.
Press the license plate and the adapter mount firmly to the car to secure and get full contact
between the license plate and the double-sided tape. Screw the license plate back onto the rear of
your vehicle.
16.
Attach the Camera to the adapter, you can adjust the vertical angle of the Camera to your specific
need.
17.
As a last check, note the position of the view from the Camera when you place the vehicle in
reverse. Adjust the angle of the Camera as necessary to achieve the best rear view.
18.
There is no need to remove and recharge the camera.
If the 12/24V socket provides constant power, please unplug the monitor power adapter when the
vehicle is not in use.
Please follow your local laws and regulations regarding constant monitoring while driving. It is
recommended that you glance at the image only when in reverse, and use as an aid. Do not rely solely
on the camera view to back up.
By using the power button on the Monitor, the image can be shut off while driving. Please remember to
turn back on once the vehicle is stopped and ready to reverse.
When running the power cable inside of the vehicle do not close doors or windows on the cable or
obstruct it in any way.