5
info@
cocoonfires
.com
www.
cocoonfires
.com
ADDITIONAL PARTS NAMES AND DESCRIPTIONS
1
2
A
B
CLOSED
OPEN
The
Lifting Handle
is used to take the
Combustion Chamber
in and out of
the M
ount Plate
inside the
Main
Body
for filling and cleaning. Step 1 is
to join Part A and Part B as shown to
the left. Once you have placed the
tag of Part A into the slot of Part B,
then twist it 90 degrees to lock them
as one handle.
Once both parts of the handle are
clipped together as shown on the previous
image, the handle can be slid into an
open or a closed position as shown on the
left. To use the handle correctly to lift the
Combustion Chamber
in and out of the
Mount Plate
inside the
Main Body
, follow
the instructions below. It is very important
than when handling the
Combustion
Chamber
with the
Lifting Handles
, that the
combustion chamber be kept as level as
possible to avoid spilling of fuel.
With the handle in the closed position,
lower the flat tabs at the bottom of the
Lifting Handle
into the
Burner Vent
opening of the
Combustion Chamber
.
When the flat ends of the
Lifting Handles
are all the way inside the C
ombustion
Chamber
, slide the handle into the open
position as far as it will go. Grip the handles
Parts A and Part B firmly with one hand in
the fully open position, then lift and insert
the
Combustion Chamber
inside the
Mount Plate
.
