20
Calling
Outcoming Call
●
Dial the number in the usual way. The number will be marked after a few seconds.
Do not perform any operation during the interval after dialing the number.
●
Enter *#11*xx# to set the interval with which the Co-Comm CV100 dials a
telephone number. Element xx indicates a number between 4 and 12. Co-Comm
CV100 dials the telephone number in xx seconds. If you hear the confirmation
tone (double beep), it means that the interval has been set. If the reject tone (long
beep) is heard, it means that an incorrect key was pressed and the interval could
not be set. Wait until the Co-Comm CV100 returns to off-hook status and the dial
tone is heard again to set the interval.
Adjuting calls volume
It is possible to adjust calls volume for both speaker and microphone. There are 9
available volume levels. Level 1 is the lowest and level 9 is the highest. The default
value for both is 5.
●
To adjust microphone volume, pick up the phone and dial *#15*x# code where x
corresponds to the volume level that we want to configure.
●
To adjust speaker volume, pick up the phone and dial *#16*x# code where x
corresponds to the volume level that we want to configure.
If you hear the confirmation tone (double beep), it means that the volume level has
been set correctly.
If you hear the reject tone (long beep), it means that you have pressed an incorrect key
and that the volume of the call could not be adjusted. In this case, hang up the phone
and try again.
Some services depend on the network. For more information, contact your network
operator.
