Cochlear Baha 6 Max, Руководство пользователя, Страница: 9 / 21

A
B
C
D
2
3
4
17 16
Your quick guide to Baha
®
SoundArc
™
The Baha
®
SoundArc
™
is an alternative to the Softband. It can be
used for test situations and for long-term use for adults and children.
Wearing your Baha SoundArc
The SoundArc is designed to sit above the ears and be worn behind the head,
with the Baha sound processor attached to the connector disc just behind
the ear. It can be used on one side or both by adding a connector disc.
Replacing the Baha SoftWear Pad
Replace the pad when worn, damaged,
or dirt or moisture cannot be wiped o
ff .
Step-by-step
1 Remove the old pad from the connector disc,
and any adhesive residue left behind.
2 Remove the cover sheet to expose
the adhesive surface.
3 Attach the pad to the connector disc. Make sure
it is centered and covers the entire surface.
3 Remove the remaining cover sheet from the pad.
Cleaning
Remove the sound processor and Baha SoftWear Pad
before washing or cleaning. Clean the SoundArc
with a soft wipe. Clean the snap coupling with a small,
soft brush. Never use any strong chemical solutions.
SoundArc features
A Soft silicone tips and grips—provide a comfortable
fi t
B Steel spring band—
fi ts most shapes and sizes
C Baha SoftWear Pad
D Connector disc
For more support, visit
www.support.cochlear.com/us/en/home
Step-by-step
1 Make sure the tips rest slightly in front of the
ears and the connector disc is placed above
and behind the ear.
2 Slide the disc to the position shown in the image.
It should not wobble. Ensure the disc sits fl ush
against the skin. To avoid feedback, do not place
the disc too close to the ear.
3 If the SoundArc falls backward, does not stay
on or there is a gap at the back of the head,
bend open at point A and inwards at B.
4 Fit the SoundArc with any accessories (glasses,
etc.) in place, so they can be removed without
a
ff ecting the position of the SoundArc.
1
2
3
4
A
B
B