- 16 -
System Connections
Connecting an Antenna
Connect the supplied AM/FM antennas to listen to the radio.
_
In order to improve the signal, move the AM loop antenna away from the system and
other equipment.
_
Fully extend the FM antenna.
_
Keep the FM antenna as horizontal as possible after connection.
_
When connecting the supplied AM loop antenna, connect the two black cord ends to
the AM and ground jacks as shown below.
_
If the FM reception is poor, use a 75
Ω
coaxial cable to connect the system to an
outdoor FM antenna as above.
_
If you connect the system with an outdoor FM antenna, you should ground the
system in order to avoid a lightning strike.
_
To prevent a gas explosion, do not connect the ground wire to a gas pipe.
OUTDOOR
FM ANTENNA
EARTH WIRE
