![background image](http://html1.mh-extra.com/html/cobra/vnm-signmaker/vnm-signmaker_user-manual_2630512008.webp)
7
VnM
®
4 SignMaker Setup
Connecting VnM®4 Keypad and Power Up
1. Place printer on a flat and secure surface.
2. Make sure the power switch is OFF.
3. Connect VnM4 Keypad to the VnM4 SignMaker RS-232 serial port.
4. Plug power cord into AC power cord socket at the rear of printer then
plug power cord into a properly grounded power outlet.
Optional Battery Pack
Power Supply
Plug
USB
Paralle
RS232
Power Cable
Power Switch