15
CHOOSE LABEL WIDTH:
4 X 32 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
4 X 24 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
3 X 24 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
2 X 14 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
2 X 12 INCHES (1-LINE)
CHOOSE LABEL WIDTH:
1 X 7 INCHES (1-LINE)
2INCH Repeat Label
PRESS ENTER
1INCH Repeat Label
PRESS ENTER
ENTER QUANTITY TO PRINT:
1
ENTER TEXT:
NITROGEN
PIPE MARKING TEMPLATES
PRESS ENTER
NITROGEN
a) 2 X 12 INCHES
FIRE SPRINKLER WATER
b) 1 x 7 INCHES
DOMESTIC CHILLED WATER
c) 3 x 24 INCHES
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
DOMESTIC CHILLED WATER
d) 2INCH Repeat Label
1. Select the Pipe Marking Templates
by pressing the ENTER key on the
VnM
®
4 Keypad.
2. Select the corresponding Pipe Marker
template with the diameter pipe your
are going to identify. Press the up and
down arrow key to go through the Pipe
Marker template selections.
3. Enter the text/symbols for the marker,
press the ENTER key when complete.
4. Enter the quantity to print and
press ENTER.
VnM
®
4 Keypad Templates - Pipe Marking
The Pipe Markers Template meets ANSI/ASMI letter height standards and tape
lengths. Create any custom pipe marker with the appropriate template.
Below is a 2 x 12 pipe marker identifying the contents of the pipe as NITROGEN (a).
IF YOU ARE NOT SURE
WHAT MARKING TEMPLATE
TO USE REFER THE VNM
PIPE MARKING GUIDE
VnM4 Tips