- 9 -
5.5 HEIGHT OF CUT
Apply outward pressure to disengage the lever from rack. Move the lever forward or back to adjust the height. (Fig.6 and see
clause 7.9)
Fig.6
5.6 Tool Box
This lawn mower has a tool box, you can push the button to open it, and then press the cover to lock it. You can put tools such as
a spanner, screwdriver in this box. (Fig.7)
Fig.7
6.
“3 IN 1”
The lawn mower has 3 in 1 features:
1. Rear grass collection.
2. Grass mulching.
3. Side-discharge.
What is mulching?
When mulching, the grass is cut in one working stage, then finely chopped and returned to the grass strip as natural fertilizer.
Recommendations for mulch-mowing:
- Cut your lawn regularly. Cut-back by a maximum of 2cm from grass of 6cm height.
- Ensure the blade is sharp for best results - Do not mulch wet grass.
- Set maximum engine speed.
- Only move at a walking pace.
- Regularly clean mulching wedge, housing inner side and mowing blade.
Starting Operation
ONE: Retrofitting for mulching mower
WARNING:
only with a stopped engine and standstill cutter blade.
1. Raise the rear cover and remove the grass catcher.
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening on the deck. (
Fig.
8A/8B)
3. Lower the rear cover again. (
Fig.
8C)