Cobra MT250C Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 47

background image

1. Perform the maintenance and checking operations described in this manual at regular
intervals. If any parts must be replaced or any maintenance or repair work not described
in this manual must be performed. Please contact a representative from the nearest
store authorized servicing dealer for assistance.
2. Under no circumstances should you ever take apart the brush cutter or after it in any
way. Doing so might result in the brush cutter becoming damaged during operation or the
brush cutter becoming unable to operate properly

3. When using your brush cutter, never take you eyes off. If you need to, place you
throttle into idling position.
4. When using your brush cutter. Do not let the unit get closer to your feet nor raise the
unit above your waist.

1. Make sure the appropriate blade is in placed.
2. When transportation by car, fix the unit firmly using a rope. Do not transport by bicycle
or motorcycle because it is dangerous.
3. Never transport brush cutter in a rough road over long distance without first removing
all fuel from fuel tank, as doing s might cause fuel to leak from tank.

NOTES ON TRANSPORTATION

OPERATION SAFETY PRECAUTIONS

1. Grip the handle on the brush cutter firmly with both hands. If you suspend the work,
place the throttle into the idling position.
2. Always be sure to maintain a steady,even posture while working.

3. Maintain the speed of the engine at the level required to perform
cutting work, and never raise speed of the engine above the level
necessary.

4. If the grass get caught in the blade during operation, or if you nee to
check the unit or refuel the tank, always be sure to turn off the engine.

5. If the blade touches a hard object like a stone, stop the engine
immediately and check if something wrong with the blade, if so, replace

the blade by new one.
6. If someone calls out while working, always be sure to turn off the

engine before turning around.
7. Never touch the spark plug or plug cord while the engine is in

operation.doing so may result in being subjected to an electrical shock.

8. Never touch the muffler, spark plug or other metallic parts of the

engine while the engine is in operation or immediately after
shutting down the engine. Doing so may result i serious burns.
9. When you finis cutting in one location and wish to continue work
in another spot, turn off the engine and turn the unit as the blade
faces away from your body.

MAINTENANCE SAFETY PRECAUTION

22

«
...
21
22
23
24
25
...
»

Содержание MT250C
















































Отзывы:

Нет отзывов

Похожие инструкции для MT250C

Бренд: Wahl Страницы: 2

Бренд: Parkside Страницы: 120

Бренд: Stiga Страницы: 11

Бренд: Tanaka Страницы: 36

Бренд: O.K. Страницы: 10

Бренд: Amos Страницы: 10

Бренд: Zenoah Страницы: 14

Бренд: Sabo Страницы: 72

Бренд: Ikra Страницы: 32

Бренд: Draper Страницы: 12

Бренд: LawnMaster Страницы: 22

Бренд: Ikra Страницы: 32

Бренд: IKRA Mogatec Страницы: 116

Бренд: Wahl Страницы: 12

Бренд: Verdemax Страницы: 24

Бренд: Kobalt Страницы: 19

Бренд: GreenWorks Pro Страницы: 40

Бренд: Portland Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды