Customer Assistance
Warranty
Introduction
19
Nothing comes close to a Cobra
™
Operation
18 English
Using Your Radio
To Scan Memory Locations:
1. Press the Mode button until the Scan icon,
Memory icon, and the memory location
number flashes on the display.
2. Press the Channel Up or Channel Down
button and your radio will begin scanning
memory locations.
3. The Scan icon will continue to be displayed
when scan is on. Your radio will continue
to scan memory locations and stop if an
incoming transmission is detected. Your radio
will remain on that memory location for ten
(10) seconds. During this time, you can:
a. Press and hold the Talk button to
communicate with others. Your radio
will remain on that memory location
and return to Standby Mode.
b. Press the Channel Up or Channel Down
button to resume scanning memory locations.
c. Press the Mode button to proceed to
next available Mode function.
If you press the Talk button while scanning
and not within ten (10) seconds of receiving
transmission, you will transmit on the last
channel you transmitted or received on.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning memory locations.
If you want to reduce the number
of memory locations being scanned,
you need to “un-program” all unwanted
locations by changing both the main
channel and privacy code to “00.”
See page 15 for more details.
You must have at least two (2) memory
locations programmed in order to scan
memory locations.
VibrAlert
®
and Call Tones
•
Your microTALK
®
radio can alert you to
incoming signals by sounding an audible
call tone, by vibrating silently, or both.
To Change Call Settings:
1. Press the Mode button until the Call Setting
icon flashes on the LCD. The current setting
(V Ring, Vibrate Only, or Ring Only)
is displayed.
2. Press the Channel Up or Channel Down
button to change the call setting.
3. a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock button to enter the new
setting and return to Standby Mode.
10 Call Tone Settings
•
You can choose between ten (10) different call
tone settings to transmit a unique call alert.
To Change a Call Tone Setting:
1. Press the Mode button until the letter “C”
and the current call tone number (1 through
10) is displayed. The current call tone will
sound for one (1) second.
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
3. a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press the Lock button to enter the new
setting and return to Standby Mode.
Operation
Mode Button
Scanning Memory
Channel Button
Mode Button
Ring Only
VibrAlert
®
+ Ring
VibrAlert
®
Only
Channel Button
Mode Button
Call Tone Setting
Channel Button
