37
DANGER
of fire or scald
It is forbidden to use naked flame as lighting device when carrying out checks or looking for le-
aks in the machine.
• Do not lubricate, repair or carry out settings on the crane when it is working, unless this is expressly
required in the instructions of the Operator’s/Maintenance manual.
• If it is necessary to lift the crane and/or other parts, make sure that they are locked as requested from
current safety regulations
• Always use approved protective clothing, safety gloves and protective glasses when using steel
ropes, as they produce steel splinters.
• Never use the tools in a way different from the one they are meant, i. e.: pliers instead of wrenches.
• The maintenance area is to be kept clean and dry. Remove immediately any trace of water or oil.
• Leakage of fluid from a very small hole may be almost invisible and yet strong enough to penetrate
the skin. Before starting looking for the leaks, it is important to wear protective glasses with side
shields. Do not use your hands, use a piece of cardboard or wood to locate the source of the leak.
Injuries caused by pressure fluid may result in serious infections, so it is recomended to contact
immediately a doctor.
• Do not heap dirty rags with oil or grease, they may be a danger of fire. Instead, put them in a metallic
closed case.
• Immediately replace any missing sticker or plate carrying a notice of danger, attention or other in
structions.
IMPORTANT
Various part of the crane are manufactured with high tensile steel. Never perform any operation
(welding, drilling, etc) without authorization and instructions from the manufacturer.
ATTENTION
The crane is supplied with electrical and electronic devices installed. Always disconnect the
connections of these devices before carrying out welding or other operations with electric to-
ols on the crane or on any part of the truck .
• When repair or maintenance operation is over, before putting again the machine into service, make
sure that any tool or other piece has not been forgotten in places containing moving parts, or close to
them.
• The machine and its accessories has to be kept in good conditions.
• Replace failed or worn components with genuine spare parts or other approved by the Manufacturer.
9.3 MAINTENANCE SCHEDULE
9.3.1 Daily checking
• Check the level of hydraulic oil in the tank.
• Check the hoses, the fittings and all the other components of the hydraulic system, in order to elimi
nate any possible source of oil leak.
• Check that all the crane is in good condition.
• Immediately repair the item or the component found to be faulty.
!
