Quick Set-Up Guide
The following basic steps enable quick and easy installation of your new
Cobra INTENNA Cordless Phone for use on a desk or countertop. You are
encouraged to review this complete instruction manual to become familiar
with all of the operating instructions and features of your new phone.
NOTE: Before using, connect your new system to AC power (see instruc-
tions below) to charge it overnight (at least 12 hours) for optimum condi-
tioning of the rechargeable battery inside the cordless handset.
1.
Insert round connector of power adapter into POWER jack (at rear of
cordless phone’s base; see diagram #1 below). Plug power adapter into a
standard 110 VAC household electrical outlet. Then place handset in
base so CHARGE indicator lights (see p. 10).
2.
After charging, remove the twist-tie from the phone cord and plug the
modular telephone connector into the phone jack on your wall (see
above).
3.
Make sure that the RINGER switch is ON (located on base; see p. 9 for
details).
4.
Set the PULSE/TONE switch (at the rear of the base) for proper opera-
tion (see page 9 for details).
Note:
Make sure you have charged handset in base 12 hours before
using.
Diagram #1
Connecting
power and
telephone
BASE UNIT—
REAR VIEW
4
≠
①
AC POWER JACK
①
ELECTRICAL OUTLET
MODULAR PHONE JACK
≠
HANDSET
ON/OFF
RINGER SWITCH
➂
PULSE/TONE
SWITCH
√
