![background image](http://html.mh-extra.com/html/cobra/csp6/csp6_installation-and-operation-manual_2630456012.webp)
10
4. Pull out the front part of the arm to extend the
arm and tighten the adjuster.
5. On the Control Panel,
turn the Water Valve anti
-clockwise to the ‘On’
position, water will flow
from the Water Filling
Arm.
6.
When the Water Filling
Arm is not in use, move
the arm back against the splashback to prevent
damage to the arm and exposure to the heat
from the Stock Pot burners.
1. Check gas supply is turned ‘On’ at the mains
supply.
2. Ensure that the Main Burner Gas Valve is in the
‘Off’ position.
3. Rotate the Pilot Burner Gas Valve anti-clockwise
to the ‘On’ position.
4. Press and hold the Gas Safety Valve depressed
and manually light the Pilot Burner.
5. Keep holding the Gas Safety Valve depressed
for 30 seconds after the pilot burner is lit, to allow
the thermocouple to warm up.
6. Release the Gas Safety Valve, the pilot burner
should remain alight.
7. If the pilot burner does not ignite, repeat Items 3
to 6 above.
1. Turn ‘On’ the Main Burner Gas Valve anti-
clockwise to the setting required to suit the
cooking requirements. The main burner will
ignite.
Water Valve
1. Turn the Main Burner Gas Valve anti-clockwise to
the ‘Off’ position, the Main Burner will extinguish.
2. The Pilot Burner will still be ’On’.
1. Turn the Pilot Burner Gas Valve clockwise to the
‘Off’ position, the Pilot Burner will extinguish.
2. Turn ‘Off’ the gas supply at the mains supply.
Содержание CSP6
Страница 1: ...242360 1 Gas Stock Pot Model CSP 6 I N S T A L LA T I ON A N D OP E R A T I ON M A N U A L ...
Страница 19: ......