11
WARNING!
Never use more than 1 cutting height washer.
One washer can only be fitted between the blade and the fan and never between blade and the bolt.
Always stop the motor before adjusting the height of cutting position. Remove the batteries before
completing any maintenance or adjustments.
6. OPERATING INSTRUCTIONS
6.1 STARTING
1. Loosen the locking knob, fold the wheel frame and tighten the locking knob, or remove the wheel frame.
(Fig.9A/Fig.9B)
2. Switch on the isolator key.(FIg.9C)
3. Lifting the hook to the
“
Mowing
”
position. (Fig.9D)
4 . Press the safety push-button.(FIg.9E)
5. And meanwhile, grasp the brake control bar and hold it against the upper handle. (FIg.9E)
6. If you release the brake control bar, the motor will stop.
Fig.9A Fig.9B Fig.9C
Fig.9D Fig.9E
6.2 HOW TO MOW
Warning!
Before using the lawnmower, always visually inspect to see that blades and bolts are not worn or
damaged.
1. Lifting the hook to the
“
Mowing
”
position. (Fig.10)
2. Mow twice a week in the growing season. Your lawn will suffer if more than one third of its length is cut at
one time.
brake control bar
safety push-button
Locking knob
Mowing position
