Cobra 4600 CAN, Руководство по установке

Страница: 15 / 20

INSTALLATION MANUAL 4600 CAN/PLIP
19
The driver recognition must happen any time the ignition key is turned to the ON position or when, with the ignition key
already ON, the driver side door is opened and then closed to get off the vehicle. If the driver is not recognized within
60 s the emergency panel LED starts
fl ashing quickly signalling for the next 30 s the missed driver recognition. When
this time elapses the system starts generating alarm sequences also if the engine is running, so this situation can take
place while the vehicle is driven. The engine starting inhibition will become active as soon as the ignition key is turned to
the OFF position; additional attempt to start the vehicle will not be possible. To interrupt the anti hi-jacking functionality
press once the Driver Card pushbutton or digit the complete emergency PIN Code on the emergency panel pushbutton.
Note : the product is delivered with this function disabled as its usage invalids the product European homologation. It
can be used only for non-european countries where the functionality is not in con fl ict with the local regulations.
7.8 - Garage mode.
This function allows to temporarily disable all automatic protection functionalities of the system .It can be used, as an
example, when you need to leave the vehicle at a workshop for maintenance to avoid the automatic activation of any
functionality. When the garage function is active the driver is allowed to turn the ignition key on for 10 times (engine
running). After 10 times the system restore all automatic protection functionalities.
Activation
- Open driver side door.
- Turn the ignition key ON.
- Enter the complete emergency PIN Code (4 digits) on the emergency panel pushbutton.
- A fl ash of the direction lights con fi rms the activation.
Deactivation
- Lock then unlock the vehicle with the remote control.
- A fl ash of the direction lights and an audible signal con fi rm the deactivation.