M o d e l Y e a r 2 0 1 6 p a g e
!
3 1
M a v e r i c k B o a t C o m p a n y , I n c . • 3 2 0 7 I n d u s t r i a l 2 9 t h S t . • F o r t P i e r c e ,
F l o r i d a 3 4 9 4 6 • ( 7 7 2 ) - 4 6 5 - 0 6 3 1 o r ( 8 8 8 ) - s h a l l o w • F a x : ( 7 7 2 ) 4 8 9 - 2 1 6 8
OPTIONAL FEATURES
Optional Windlass Deluxe
The windlass is used to lower and raise your anchor assembly. The
switch is mounted at the helm station to the left of the steering wheel.
The solenoid switch is mounted in the leaning post (see following page)
and the battery cables are run up the starboard side. The windlass is
mounted inside the anchor locker at the bow of the boat. To access this
area, lift the anchor hatch at the bow. A bow plate and anchor roller have
been added to accept the anchor and keep it far enough from the bow of
your 277CC to prevent any damage that may occur due to improper
storage. The windlass is mounted just aft of the bow roller plate.
Optional Fusion Stereo System
If you chose the stereo option, your 277 CC came with a Fusion stereo model MS-UD750 with eight matching speakers.
Please refer to the Fusion Owner’s Manual in your ditty bag for operation. Even if your boat didn’t come with the stereo, your
boat is pre-wired for four speakers in the cockpit and for four speakers in the hardtop. (Refer to pictures below for general
locations of speakers and pre-pulled wiring.) Note that an amplifier is required to power more than four speakers with this
model Fusion. The amplifier is standard along with the four speakers in the hardtop if the boat has the speaker hardtop
option.
**WARNING: READ ALL OF
THE INSTRUCTIONS BEFORE
OPERATING THE WINDLASS
