M o d e l Y e a r 2 0 1 6 p a g e
!
1 3
M a v e r i c k B o a t C o m p a n y , I n c . • 3 2 0 7 I n d u s t r i a l 2 9 t h S t . • F o r t P i e r c e ,
F l o r i d a 3 4 9 4 6 • ( 7 7 2 ) - 4 6 5 - 0 6 3 1 o r ( 8 8 8 ) - s h a l l o w • F a x : ( 7 7 2 ) 4 8 9 - 2 1 6 8
ELECTRIC HEAD (CONT.)
Electric Head Continued
The Jabsco Y-Valve is designed to provide flexibility of onboard
waste management by diverting waste either to the dockside
pump-out fitting or directly overboard where legal to do so. Check
local and Federal regulations to determine where direct overboard
discharge of untreated waste is permitted.
Some near shore areas and inland areas are designated as "No-
Discharge Zones" where the discharge of any onboard waste, even
treated waste is strictly prohibited.
Many of these areas require a
waste retention system that can be positively secured in an
onboard retention mode.
The Jabsco Y-Valve accommodates this requirement by providing
the ability to add a padlock that secures the selector handle in
either direction to ensure waste is directed to an onboard holding
tank. The Y-Valve may also be used to direct waste from a holding
tank to a waste deck plate for removal by a dockside pump-out
facility.
Toilet & Macerator Switch Located on the
Starboard Aft Wall of the Head Console
Macerator Used for Pumping Direct
Overboard Discharge
Y-Valve Used to Direct Waste Discharge
