M o d e l Y e a r 2 0 1 6 p a g e
!
2 9
M a v e r i c k B o a t C o m p a n y , I n c . • 3 2 0 7 I n d u s t r i a l 2 9 t h S t . • F o r t P i e r c e ,
F l o r i d a 3 4 9 4 6 • ( 7 7 2 ) - 4 6 5 - 0 6 3 1 o r ( 8 8 8 ) - s h a l l o w • F a x : ( 7 7 2 ) 4 8 9 - 2 1 6 8
STANDARD FEATURES
Cockpit Bolsters
Cockpit bolsters are standard with the 277 CC. The bolsters in the rear cockpit above the vertical rod storage are hard
mounted to the gunwale boards and are designed to stay on the boat.The bow bolsters can be removed for storage by
carefully gripping the bottom side of the cushion with your hands spread a comfortable length apart and lifting up. You will
feel the cushion release. To put the bow bolsters back on the boat line up the holes on the backside of the bolsters with the
the top of the clips on the gunwales. Push the cushion in and down on the clips until the cushion will not go down any
further. You should feel the bolster lock in place.
Pull Up Bow Light and Cleats
The bow light and cleats are stainless steel pull up style and can remain hidden when not in use. This is especially helpful
while fishing as it leaves nothing in the bow to interfere with your line. The bow light lifts from the indent at its front. It will
lock in place once fully pulled up. Note that it is required by law to have the bow light on, in the up position and unobstructed
when operating in low visibility situations. To raise the cleats simply grip the indents and lift until locked. To recess these
items simply push them back into the deck. As with all stainless moving parts on your Cobia it is recommended that you
routinely apply a stainless safe corrosion inhibitor and lubricate to keep these items working properly.
