| 2021-07 User manual Minimaxx Wheelchair Push Motor
11
7. Driving instructions
Always perform the first ride with the Minimaxx
Wheelchair Push in a place with plenty of space, a
level surface, and no passenger. It ensures a safe
first acquaintance with the Push Motor.
Please check that the Push Motor battery is fully
charged before removing it from the battery
charger.
A red charge light shows that the battery is
charging. The charge light on the charger turns
green when the battery is fully charged. See
Charging instructions on page 12.
Lower the Push Motor onto the driving surface
and position the lifting strap so it cannot be
entangled in the wheels.
Fig. 1
Turn on the power on the Push Motor remote
control by using the ON/OFF button (1).
The battery indicator of the remote control (2)
shows with a dash of green light how much power
there is left on the battery. Determine with the
buttons (3) and (4) whether the Push Motor
should drive forward or backward. The blue light
(5) and the green light (6) indicate the selected
direction.
Adjust the Push Motor top speed on the speed
regulator of the remote control (7).
Select “turtle” for low speed and “hare“ for high
speed. It is recommended to
start with “turtle”.
The Push Motor will drive the wheelchair forward
when the remote control speeder is activated.
When letting go of the speeder the wheelchair
stops instantly. For more speed push the speed
regulator to “hare”.
When going downhill let slightly go of the speed
regulator to reduce speed.
On very steep slopes the wheelchair must be
driven backwards down the hill.
Fig. 2
WARNING
-
Turn off the ON/OFF button during longer breaks to avoid errors if the wheelchair is vacated.
-
Lock the parking brakes of the wheelchair when the wheelchair is vacated.
