| 2021-07 User manual Minimaxx Wheelchair Push Motor
12
8. Charging instructions
Connect the Push Motor to the battery charger
after use. Then the battery is charged and ready
for the next trip.
Fig. 1
The battery charger fits into a standard 230V wall
outlet and the charging connector on the battery.
The light on the charge light is red while charging
is in progress. The charge light turns green when
the battery is fully charged.
Be aware that the charge light is also green if the
charger gets 230V but is taken out of the battery.
With normal use of the Push Motor charging the
battery will take 6-8 hours.
If the battery is run almost empty, charging will
take up to 12 hours.
Fig. 2
WARNING
–
AVOID ACCIDNTS AND POWER FAILURES
-
Remember that Push Motor can move during charging!
-
Remember that Push Motor must be fully charged before and after storage.
-
Remember that Push Motor use power when the remote control is on.