100-M0105X1
17
of
23
www.cobham.com/gms
5.3
Streamer Configuration Parameters
5.3.1
IP Address
This control allows the user to change the IP address of the unit. The user should make a note of the
unit’s new IP address when changing it.
Failure to do so will result in an inability to use the web browser interface until the unit’s new IP
address is recovered.
5.3.2
Multicast Address
This control allows the user to change the multicast address used by the unit. The default value is
239.16.33.254.
5.3.3
Port number
This control allows the user to change the multicast port used by the unit. The default value is 10000
5.3.4
TTL
This control allows the user to change the multicast port used by the unit. The default value is 10000
5.3.5
SAP Address
This control allows the user to change the value SAP/SDP multicast address used by the unit. The
default value is 224.2.127.254 and the port used is 9875. These are standard multicast values for such
parameters, and it is recommended they are not changed unless specifically required due to routing
restrictions.
5.3.6
SAP/SDP Data
Service Name – textual information naming the multicast stream as delivered in the SAP/SDP
packets from the unit. Default is “MPEG Stream”.
Info – further textual information about the multicast stream as delivered in the SAP/SDP packets
from the unit. Default is “NetEng”.
Description – Optional URI (Universal Resource Identifier) pointing to a web page on the network
containing additional information about the multicast
Default is
www.cobham.com/gms
Bitrate – textual information indicating the bitrate in kbits/s of the stream. Default is user kbits/s.
The default values :
o
IP
Address.
192.168.0.71.
o
Multicast
address
239.16.33.254
o
Multicast
port 10000
o
SAP/SDP multicast address
224.2.127.254
o
SAP/SDP
port
9875