COBHAM Sea Tel 4010W-33, Руководство по установке

Страница: 30 / 141

4010W-33 Installation Manual Installation
3-10
3.6.3. System Configuration
Figure 3-1 Series 10 Simplified Block Diagram
3.6.4.
1. Install the ACU in the front of the standard 19” equipment rack or other suitable location. The DAC-
2202 ACU is one rack unit high.
Installing the Below Deck Equipment
2. Install the Terminal Mounting Strip on the rear of the 19” equipment rack or other suitable location
that is within 6 feet of the rear panel connections of the ACU. It also is one rack unit height.
3. Install the Base Multiplexer Panel on the rear of the 19” equipment rack or other suitable location
that is within 6 feet of the rear panel connections of the ACU. It is four rack unit height.
4. Install your Satellite Modem, Router, VOIP adapters, Telephone equipment, Fax machine, Computers
and any other below decks equipment that are part of your installation.
3.7. Connecting the Below Decks Equipment
Connect this equipment as shown in the System Block Diagram.
3.7.1.
Connect the AC Power cable that supplies power to the ADE to a suitably rated breaker or UPS.
Connecting the ADE AC Power Cable
3.7.2.
Connect the AC Power cables that supply power to the Below Decks Equipment (ACU, Satellite Modem,
phone, fax, computer and all other equipment) to an outlet strip fed from a suitably rated breaker or UPS.
Connecting the BDE AC Power Cables
3.7.3.
5. Attach the TXIF coax from the antenna to the TX Connector on the Base Multiplexer Panel.
Connecting the ADE IF Coaxes