COBHAM Sea Tel 4010W-33, Руководство по установке

Страница: 11 / 141

10 Series System Configuration(s) 4010W-33 Installation Manual
1-1
1. 10 Series System Configuration(s)
The 10 Series Stabilized Antenna system is to be used for Transmit/Receive (TX/RX) satellite communications, it is comprised of
two major groups of equipment. These are the Above Decks Equipment (ADE) and the Below Decks Equipment (BDE). There
will also be interconnecting cables between the ADE & BDE and cables to provide other inputs to the system.
1.1. Basic System Information
The 10 Series Antennas will be available in 2 dish sizes (Diameter – active area):
•
1.0 M (40 inch)
•
1.2 M (50.0 inch)
Each dish size will be available in multiple configurations:
•
Variety of BUC manufacturers and power output capabilities
•
Variety of BUC/HPA power output capabilities
•
Cross-Pol Feed assembly
•
Optional Co-Pol diplexer and LNB (waveguide systems ONLY)
•
Choice of Single fixed frequency, dual-band, tri-band or Quad-Band LNB(s)
The 10 Series Antennas are available in multiple radome sizes:
•
131.3 cm (50 inches) Diameter
•
155 cm (60 inch) Diameter
•
1.76 M (66 inch) Diameter
•
201.59cm (76 inch) Diameter
•
205.23cm (81 inch) Diameter [Air Conditioning available for this radome ONLY ]
1.2. System Cables
AC Power & Coaxial cables will be discussed in a separate chapter.
1.3. Other Inputs to the System
Multi-conductor cables from Ships Gyro Compass, GPS, phone, fax and Computer equipment may also be connected
in the system.
1.4.
40B
Simplified block diagram of a 10 Series system
Your 10 Series TXRX system consists of two major groups of equipment; an above-decks group and a below-decks
group. Each group is comprised of, but is not limited to, the items listed below. All equipment comprising the Above
Decks is incorporated inside the radome assembly and is integrated into a single operational entity. For inputs, this
system requires only an unobstructed line-of-sight view to the satellite, Gyro Compass input and AC electrical power.
A. Above-Decks Equipment (all shown as the ADE) Group
•
Stabilized antenna pedestal
•
Antenna Reflector
•
Feed Assembly with Cross-Pol LNB
•
Co-Pol LNB (xx10(M)- 33 Only)
•
16W Ku-Band Solid State Block Up-Converter (BUC)
•
Radome Assembly
B. Below-Decks Equipment Group
•
Antenna Control Unit
•
Terminal Mounting Strip Assembly.
•
Base Modem Panel