manualshive.com logo in svg

COBHAM Sailor 250 FleetBroadband, Руководство по обучению, Страница: 167 / 270

Поделиться
Скачать
COBHAM Sailor 250 FleetBroadband Скачать руководство пользователя страница 167

157

SAILOR FleetBroadBand

Training Manual

5

View the Event log for further details: No further info in Event log.

View the diagnostic report or Debug shell for verification of GPS.
System has GPS fix.

View the location of the antenna to verify the clear view the 

satellite.

If system has GPS fix and a clear view to satellite, a hardware 

problem in the RX chain or in the tracking / motor drive, must be 

the problem.
Check that the antenna is performing a sky scan.
If scanning replace module, in the RX chain, one by one.
If not scanning replace the pcb’s, in the tracking / motor drive, one 

by one.

Figure 5-63

Like with the error log it is possible to monitor the eventhandler 

log online.
In the debug shell use the cmd: 

Eventhandler - l

Like with the error log it is possible to monitor the GPS  status 

online.
In the debug shell use the cmd: 

Cnav - m pos

telnet:/$ 

cnav - m pos

55.79389 (lat) 12.52116 (lon) 110.44m (hmsl) (3D)
Fix at: Tue Jan 12 12:33:20 2010
System time: Tue Jan 12 12:34:20 2010
ECEF x: 3508429.250000 y: 779159.437500 z: 5251666.500000
Satellites 4

Must be displayed: no

Time to first fix 00:00.25

Figure 5-64

Figure 5-65

NOTE!

In the Diagnostic report search 

for: 

eventhandler

NOTE!

In the Diagnostic report

search for: 

CNAV

NOTE!

GPS FIX:

The GPS position will not be 

shown until the terminal is 

registered with the network. 

It is the network witch ’informs’ 

the terminal that  it is allowed 

to show GPS position. (in 

some countries it is not allowed 

to show the GPS position)

So until the network has 

allowed the GPS position to be 

shown it will be hidden, and not 

shown.

Содержание Sailor 250 FleetBroadband















































































































































































































































































Отзывы:

Нет отзывов