COBHAM Sailor 250 FleetBroadband, Руководство по обучению, Страница: 126 / 270

116
Chapter 4
Interfaces
4
Do not type in a static
IP address
in the Static IP address field; a manually typed IP
address will currently not be used by the network.
There are four options for setting the APN. Unless you have special
requirements, it is recommended to use the SIM default, or to set
the common APN to SIM default, and then select Common here.
You have the following options:
Common . The APN is taken from the Common APN defined under
SETTINGS > Common.
SIM default . The APN is taken from the SIM card. If you want to
use a static IP address on the external network, select this option
either here or in the Common setting.
Network assigned . The APN is assigned from the network.
User defined . Type in the APN. APNs are provided from the
Airtime Provider.
User name : If your APN uses a user name, type in the user name
provided from the Airtime Provider.
Password : If your APN a password, type in the password provided
from the Airtime Provider.
Automatic activation : Select whether the profile selected in the
next step should be activated automatically or manually.
Primary profile
Select a profile from the Primary scroll list. This profile is used by
this network user group as a first choice, when possible.
There are several predefined profiles: Standard, Streaming 8
kbps, Streaming 16 kbps, Streaming 32 kbps, Streaming 64 kbps,
Streaming 128 kbps and Streaming 256 kbps (only SAILOR 500
FleetBroadband). Additionally, you can define your own custom
profiles.
Secondary profile
To select more than one secondary profile, press and hold Ctrl or
Shift while selecting.
Managing network devices
A network device, in this context, is an Ethernet hardware device,
identified by its unique MAC address.
When a network device with dynamic IP address is connected to
the terminal, it is automatically listed in the Network devices list.
To view the list of network devices, select
SETTINGS > LAN >
Network devices .
Locking an IP address to a MAC address
When the device is locked to an IP address, the terminal will
always assign this IP address to the MAC address of this device
(if DHCP is enabled and the Internet connection is not a Bridge
mode connection).
Figure 4-38
NOTE!
If you have selected and
started a Streaming connection
as your primary profile, the
LAN interface will be running
a Streaming connection until
you stop it or disconnect the
interface. However, if you
select one or more secondary
profiles, you can set up your
traffic flow filter so that it will
only use the Streaming profile
for certain types of traffic.
NOTE!
If you have selected both
a primary and one or more
secondary profiles you must
define a traffic flow filter before
you can establish a valid
connection.
NOTE!
Only network devices that runs
DHCP are listed here.
Devices running with a static
setup will not show in the list.