150-843708 Rev. A
Page 11 of 12
Volume Control
The volume controls are
the two knobs on the left
side of the display. The
inner knob (yellow)
controls system 1 and the
outer knob (green) controls
system 2
Press
to override the squelch and
listen to the volume on your
active RT. Adjust the inner
knob for the desired audio
level for system 1 and outer
knob for system 2.
Press
to mute all audio other than
the current active RT. This is
a fast way to temporarily
disable interfering signals.
NOTE:
This option is only available with SW 11
units that have been configured for the #4/DIM
button to act as a MUTE control.
When the dual mic mode is on, the inner knob
adjusts the audio levels for both the primary
and secondary headset.
General Information
1) IF YOU GET LOST ON AN UNFAMILIAR PAGE:
Press
multiple times to return to
the main home page and
normal operation.
2) TO CHANGE OR INPUT INFORMATION:
Rotate the Cursor (right outer) Knob
until the underline character is below
the information you wish to change.
Rotate the Value (right inner) Knob until
the desired information is displayed.
Depress the Value (right inner) Knob to
perform an “ENTER” operation.
3) TO SET THE VOLUMES:
The inner volume knob sets
the volume of your primary RT
system.
The outer volume knob sets
the volume of your secondary
RT system, if available.
Page 19
Page 18
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number(ECCN) EAR99. When exporting, diversion contrary to U.S. law is prohibited.
