150-843708 Rev. A
Page 5 of 12
System Basics
Knobs & Buttons
Direct/
Repeat
Toggle
Advanced
Modes
Edit Page
Change
Display
Brightness
Begin OTAR
Key Select
Disable
Squelch
Turn On
Scan
Returns to
Home Page
Turns
On/Off
Encryption
Enter
Program
Pages
Enables
Numerical
Entry
Secondary Mic
Primary Mic
C-5000
RT #1
RT #2
A C-5000 can control 2 RT’s (Receiver Transmitters).
Each RT has a MAIN receiver and transmitter and
possible digital ITM (Internal Transceiver Module).
IMPORTANT: OPERATORS MUST KNOW THE
FREQUENCY RANGE EACH RT TUNES.
The P-25 capable C-5000 can also control analog units
with or without synthesized guard. The Primary and
Secondary mic inputs allow two users to talk on different
RT’s at the same time.
All C-5000’s have memory for 350 preset channels, while
units with SW 11 (also known as Civil Support units) or
higher can hold 700. Channel information can be preset
using the RpWin software, or by programming through
the front panel. Each RT has a Manual channel (M) at
channel 0 location that allows the operator to manually
enter a transmit and receive frequency.
Soft Key Buttons
are used when
prompted for
display dimming or
special modes.
System 1
System 2
Volume Controls
Power On/Off
(Press small knob)
Cursor
Value and
Push to
Enter
Page 6
Page 7
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number(ECCN) EAR99. When exporting, diversion contrary to U.S. law is prohibited.
