10
6.9.1 Send SMS command “fix0password” to the tracker device, it will report
the Geo-info at 30s intervals for 5 times. (s:second, m:minute, h:hour). This command
must be in 3 digits and the maximum value is 255.
6.9.2 Unlimited times track: Send SMS "fix030s*** n+password" to the device.
6.9.3 Cancel: Send SMS “nofix+password” to the tracker device to cancel the “Auto track
continuously”.
. Note: the interval must be not less than 20s.
6.9.4 When the GPS signal is not good, the latitude and longitude you received is the last
position before going into GPS blind areas, if any bias with the location, pay
attention to the time stamp in the message.
6.10Get location in absolute street address
6.10.1 You must set up the APN of your local GSM network for the SIM card in tracker
first before using this function, if there is user name and password for GPRS login,
Please refer to 6.31 and 6.32 to configure the APN, user name and password for
GPRS login.
6.10.2 After configure the APN, send “password” to device, it will reply SMS
including real street/address name. For example: No.8, Nantou Guankou 2nd Rd.
Nanshan district, Shenzhen, Guangdong, china.
6.11 Location base service (LBS)
When the tracker device doesn’t receive valid GPS signals, tracker will positioning by
location base service(LBS), the messages includes the GPS coordinates of the last position in
SMS mode, but the LAC in message is the current new position, the location can be seen by
input the LAC code in the menu “Manual Track” of web platform www.gpstrackerxy.com,
you can also send command “password” to tracker to get the newest absolute
address and GPS coordinates as well; tracker will automatically switch to track by location
base service in GPRS mode, and actualized on the map of web server with LBS mark. And
there may be some inaccuracy with actual location by LBS tracking; the bias depends on
GSM reception.
Note: This feature can be used normally in most areas according to the signal of GSM
network. It may not be available in some areas.
6.12 View photos on cell phone
6.12.1 You must set up the APN of your local GSM network for the SIM card in tracker first
before using this function, if there is user name and password for GPRS login, Please
refer to 6.31 and 6.32 to configure the APN, user name and password for GPRS login.
6.12.2After APN configuration, send “photo+password” to device, it will take photos and
send a link SMS to authorized cell phone. Click the link, then photo can be viewed on
cell phone via Internet
6.13 Monitor
