manualshive.com logo in svg

Cobalt Digital Inc BBG-1034-AUD-PRO-DSP, Руководство по эксплуатации продукта, Страница: 34 / 118

Поделиться
Скачать
Cobalt Digital Inc BBG-1034-AUD-PRO-DSP Скачать руководство пользователя страница 34

3

BBG-1034-AUD-PRO-DSP Front Panel Display and Menu-Accessed Control

3-2

BBG-1034-AUD-PRO-DSP PRODUCT MANUAL

BBG-1034-AUDPRO-OM (V1.6)

Figure 3-1  BBG-1034-AUD-PRO-DSP Front Panel Display and Menu Controls

STATUS

COMM

REF
STATUS

INPUT
LOCK

X

Menu: Options

Status

Network Settings

Character Burner

BBG1000_FPUI_SCPD2014P8

- STATUS LED illuminated green shows unit power is OK and unit is functional.

- INPUT LOCK LED illuminated green shows at least one video input is locked to video.

- REF STATUS LED illuminated green shows valid reference is being received.
- COMM LED illuminated green shows Ethernet connection is OK.

Alphanumeric display shows configuration items, and shows and allows changes of settings when a menu item is 
accessed.

 and 

arrows denote scroll up or down to access the menu item.

arrows denotes a menu item is accessed to be selected (in the example above, Network Settings).

Press the

button to now access and enter the menu item. When this button is pressed, the selected menu item is 

displayed, along with its sub-menus.

In this example showing the Network Settings menu, 

Menu: Network Settings

 as menu item is displayed 

(indicating this is the actively selected menu item) and its sub-menus are now displayed:

Menu: Network Settings

IP: 10.99.11.162
Netmask: 255.255.255.0
Gateway: 10.99.11.1

In this example, with

pre-selecting the IP: sub-menu, pressing the 

button again opens the IP: sub-menu.

IP

010.099.011.162

The carets above and below a character indicate this character is ready for editing. Use the 

and 

buttons to decrement or increment the value. 

Use the

and

buttons to navigate to other characters.

To exit a sub-menu or a menu, press the

button. This locks in any changes and proceeds to the last-selected sub-menu or 

menu item. Repeatedly press the button to step up through sub-menus and then to other menus. Access other menu items using 
the and

buttons.

The display backlight automatically brightens with any navigation arrow activity, and then goes dim after a few moments.

X

Содержание BBG-1034-AUD-PRO-DSP























































































































Отзывы:

Нет отзывов