Cobalt Digital Inc BBG-1034-AUD-PRO-DSP Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 118

Cobalt Digital Inc BBG-1034-AUD-PRO-DSP Скачать руководство пользователя страница 18

1

BBG-1034-AUD-PRO-DSP Functional Description

1-14

BBG-1034-AUD-PRO-DSP PRODUCT MANUAL

BBG-1034-AUDPRO-OM (V1.6)

Text-To-Speech

Cobalt Digital

+TTS

is a complete 21CVAA digital text-to-speech generation /

audio insertion solution for embedded and discrete audio systems.

+TTS

is

available as a software option for new BBG-1034-AUD-PRO-DSP units. For
field upgrade, the unit must be returned to the factory for option installation.

+TTS

interfaces with industry standard Windows Share folder systems to

receive non-proprietary text, XML, or similar plain text files, and converts
and inserts realistic human-voice audio into user-configured audio channels
(typically an SAP channel pair intended for this playout).

+TTS

allows for

prioritization based on the organization's discretion (for example, severe
weather alerts out-prioritizing school closings). Alert tones are inserted over
the main program channels to alert the visually impaired that emergency
content is to occur on the SAP channel. Alerts can be played a configurable
number of times, and alerts with higher priority can interrupt current lists for
breaking news. Once the interrupt message is broadcast,

+TTS

automatically

reverts to normal audio programming. Refer to +TTS Manual Supplement
OPT-TTS-MS for detailed information and installation/setup instructions.
This supplement is available as a download on the Products Download page/
tab on the product web page.

EAS Text Crawl Generation

Option

+EAS

provides for

automated keying Emergency Alert System (EAS) text crawls in the active
program video output. The function receives its text stream via a device serial
data input. The EAS crawl start can be set to trigger upon receiving the serial
data message, or be set to use a GPI to trigger start of the EAS crawl.

Embedded in the received serial data are commands which set the message
severity to be shown by the keyed crawl (severity is correlated to
user-specified text color and background color for the crawl). User controls
allow control of the crawl speed and repeat of the crawl burn-in (if desired).

Refer to +EAS Manual Supplement OPT-SW-PHXEAS-MS for detailed
information and installation/setup instructions. This supplement is available
as a download on the Products Download page/tab on the product web page.

Audio Events Detect Function

Option

+QC

provides a

Audio Detect Events

user interface and an

Event

Triggers

user interface for checking user-selected channels to detect audio

silence conditions. The

Event Triggers

user interface in turn allows instructing

the device as to the action to take upon an event (such as go to a changed
signal routing, activate a GPO, send an automated email, or go to a
user-defined preset).

«
...
16
17
18
19
20
...
»

Содержание BBG-1034-AUD-PRO-DSP























































































































Отзывы:

Нет отзывов