Cobalt Digital Inc BBG-1022-FS Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 114

Cobalt Digital Inc BBG-1022-FS Скачать руководство пользователя страница 2

Copyright

©Copyright 2019, Cobalt Digital Inc. All Rights Reserved.
Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written
permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or
transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.
Reproduction or reverse engineering of software used in this device is prohibited.

Disclaimer

The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve
readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any
product or circuit described herein.

Trademark Information

Cobalt

®

is a registered trademark of Cobalt Digital Inc.

openGear

®

is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.

Dolby

®

is a registered trademark of Dolby Laboratories, Inc. Other product names or trademarks appearing in this manual are the

property of their respective owners.

Congratulations on choosing the Cobalt

®

BBG-1022-FS 3G/HD/SD-SDI Standalone Frame Sync with Audio/

Video Processing, AES/Analog Audio Embedding/De-Embedding, CVBS I/O, and Dual-Channel Option
(+2FS). The BBG-1022-FS is part of a full line of modular processing and conversion gear for broadcast TV
environments. The Cobalt Digital Inc. line includes video decoders and encoders, audio embedders and de-
embedders, distribution amplifiers, format converters, remote control systems and much more. Should you
have questions pertaining to the installation or operation of your BBG-1022-FS, please contact us at the contact
information on the front cover.

Manual No.:

BBG1022FS-OM

Document Version:

V1.4

Release Date:

June 26, 2019

Applicable for
Firmware Version
(or greater):

V2.081 or greater

Description of
product/manual
changes:

- Update manual for latest card functionality, including new standard

features and available options. (This firmware version has
significant user interface changes versus prior firmware versions
and the use of this new Product Manual is strongly recommended.)

- Corrections of minor manual errata.

BBG1022FS-OM (V1.4)

«
1
2
3
4
...
»

Содержание BBG-1022-FS



















































































































Отзывы:

Нет отзывов