Cobalt Digital Inc 9980-CSC-3G Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 76

Cobalt Digital Inc 9980-CSC-3G Скачать руководство пользователя страница 55

9980CSC3G-OM (V1.4)

9980-CSC-3G PRODUCT MANUAL

3-27

Operating Instructions

9980-CSC-3G Function Menu List and Descriptions

Provides a global card operating status and allows a
log download for factory engineering support. Also
provides controls for selecting and loading card
firmware upgrade files.

Networking controls provide dedicated card networking
setup in conjunction with rear module Ethernet port.

• Log Status and Download Controls

Admin

• Log Status indicates overall card internal operating status.

• Download Log File allows a card operational log file to be saved to

a host computer. This log file can be useful in case of a card error or
in the case of an operational error or condition. The file can be
submitted to Cobalt engineering for further analysis.

• Thermal Shutdown enable/disable allows the built-in thermal

failover to be defeated. (Thermal shutdown is enabled by default).

CAUTION

The 9980-CSC-3G FPGA is designed for a normal-range operating
temperature around 85° C core temperature. Operation in severe
conditions exceeding this limit for non-sustained usage are within
device operating safe parameters, and can be allowed by setting
this control to Disable. However, the disable (override) setting
should be avoided under normal conditions to ensure maximum
card protection.

• Parameter Blast

When enabled, Parameter Blast can reduce the time it takes for the card
to appear and populate in DashBoard (this is especially relevant where
high-latency connections are present). This is facilitated by reducing
some handshakes on initial DashBoard setup where control settings are
static (not being manipulated) while the card is first appearing.

Note: The frame network card is the arbiter of all frame/card

communications and in some cases may not accept full extent of
parameter blast under some conditions.

Table 3-2

9980-CSC-3G Function Menu List — continued

«
...
53
54
55
56
57
...
»

Содержание 9980-CSC-3G













































































Отзывы:

Нет отзывов