Cobalt Digital Inc 9980-CSC-3G Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 76

Cobalt Digital Inc 9980-CSC-3G Скачать руководство пользователя страница 26

2

GPIO and Serial (COMM) Connections

2-6

9980-CSC-3G PRODUCT MANUAL

9980CSC3G-OM (V1.4)

GPIO and Serial (COMM) Connections

Figure 2-2 shows connections to the card multi-pin terminal block connectors.
These connectors are used for card serial comm and GPIO connections.

Note:

It is preferable to wire connections to plugs oriented as shown in
Figure 2-2

rather than assessing orientation on rear module connectors. Note

that the orientation of rear module 3-wire connectors is not necessarily con-
sistent within a rear module, or between different rear modules. If wiring is
first connected to plug oriented as shown here, the electrical orientation will
be correct regardless of rear module connector orientation.

Setting Up 9980-CSC-3G Network Remote Control

Perform remote control setup in accordance with Cobalt

®

reference guide

“Remote Control User Guide” (PN 9000RCS-RM).

Note:

• If network remote control is to be used for the frame and the frame has not

yet been set up for remote control, Cobalt

®

reference guide Remote

Control User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of Cobalt

®

cards using DashBoard™. (Cobalt

®

OGCP-9000 and OGCP-9000/CC

Remote Control Panel product manuals have complete instructions for
setting up remote control using a Remote Control Panel.)

Download a copy of this guide by clicking on the

Support>Reference Documents link at www.cobaltdigital.com and then
select DashBoard Remote Control Setup Guide as a download, or contact
Cobalt

as listed in Contact Cobalt Digital Inc. (p. 1-15).

• If installing a card in a frame already equipped for, and connected to

DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.

RM20-9980-G/S

Split Rear Module. Provides each of the following
connections for two 9980-CSC cards:

• Four 3G/HD/SD-SDI coaxial input BNCs (SDI IN A
and SDI IN D)

• Six 3G/HD/SD-SDI Video Out BNCs (SDI OUT 1A

thru SDI OUT 4B)

Note: Available equipped with High-Density BNC

(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9980-G/S-HDBNC or
RM20-9980-G/S-DIN, respectively.

1934D

Table 2-1

9980-CSC-3G Rear I/O Modules — continued

9980-CSC-3G Rear I/O Module

Description

«
...
24
25
26
27
28
...
»

Содержание 9980-CSC-3G













































































Отзывы:

Нет отзывов