Cobalt Digital Inc 9926-2HtoS, Руководство по эксплуатации продукта

Страница: 9 / 62

9926-xHtoS-OM (V1.2) 9926-XHTOS PRODUCT MANUAL
1-5
Introduction
Safety and Regulatory Summary
Safety and Regulatory Summary
Warnings
Cautions
! WARNING !
To reduce risk of electric shock do not remove line voltage service barrier cover on frame
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
This device is intended for environmentally controlled use only in appropriate video
terminal equipment operating environments.
CAUTION
This product is intended to be a component product of an openGear® frame. Refer to the
openGear® frame Owner's Manual for important safety instructions regarding the proper
installation and safe operation of the frame as well as its component products.
CAUTION
Heat and power distribution requirements within a frame may dictate specific slot
placement of cards. Cards with many heat-producing components should be arranged to
avoid areas of excess heat build-up, particularly in frames using only convection cooling.
Frame loading recommendations as follows:
• OG3 Frame: (5) cards
• HPF-9000 Frame: (5) cards
• oGx Frame: (7) cards
CAUTION
If required, make certain Rear I/O Module(s) is installed before installing the 9926-xHtoS
into the frame slot. Damage to card and/or Rear I/O Module can occur if module
installation is attempted with card already installed in slot.
CAUTION
If card resists fully engaging in rear I/O module mating connector, check for alignment and
proper insertion in slot tracks. Damage to card and/or rear I/O module may occur if
improper card insertion is attempted.