Cobalt Digital Inc 296 BOWRIDER, Руководство пользователя

Страница: 90 / 132

Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
3
-
36 296 Owner’s Manual
COBALT
296
BOWRIDER
S
ECTION
3
MARINE TOILET (HEAD) AND
MACERATOR - OPTIONAL
Instructions
Before operating the head for the first time, refer to
the marine toilet owner’s manual in your owner’s
packet.
To avoid a fine, remove the handle of the seacock
(in the CLOSED position) or disable the system by
other means.
Manually Operated Head
1. Open the inlet water seacock.
2. Pump the floor pedal 2-4 times to fill the bowl
with water.
3. To flush, depress the foot pedal and operate
flush handle next to head at the same time.
Operate handle until all waste is removed.
To empty the bowl of excess water, operate flush
button until water level decreases to desired level.
The marine toilet (head) allows you to hold the
waste in a holding tank. The waste can then be
pumped out through a deck plate fitting marked
“WASTE.”
Vacu-Flush Head
1. If overboard discharge is to be used, make sure
the “Y” valve is in the overboard position.
2. To charge the head, depress the foot pedal on
the lower left side of the bowl, and push the
flush button. Release the flush button after the
bowl is moistened, and then pump the floor
pedal 2-4 times to fill the bowl with water.
3. To flush, depress the foot pedal and push the
flush button at the same time - hold until all
waste is removed.
The marine toilet (head) allows you to hold the
waste in a holding tank. The waste can then be
pumped out through a deck plate fitting marked
“WASTE.”
The optional macerator system allows the
discharging of waste water directly overboard. For
additional operating information, refer to the
macerator operator’s manual.
The toilet pumps the waste water into a holding
tank.
Your boat is fitted with a waste holding tank. It is
emptied through the deck plate fitting marked
“WASTE.” Waste is pumped from the head through
a sanitary waste hose to the top portion of the tank.
A sanitary waste hose is attached to the bottom of
the tank, and runs to the dockside pump-out plate.
An overboard vent keeps the tank at atmospheric
pressure regardless of waste levels.
All the components of the waste system are made
of materials specially formulated to prevent odor
permeation. It is strongly recommended you
regularly add chemical to your tank by flushing it
through the head. The chemical helps to control
odor and break down the waste. Follow the
manufacturer’s instructions on the chemical before
using.
A waste tank level monitor is installed to provide a
visual indication of the amount of waste in the tank.
NOTICE: Overboard discharge
of waste water should only be
used in approved areas. It is
your responsibility to comply
with local regulations regarding
the discharge of waste. You
could be fined if your boat has
an operable overboard
discharge system.
CAUTION
Avoid damage to the waste system. Do
not flush into a full holding tank.
NOTICE: To empty the bowl of
excess water, operate flush
button until water level
decreases to desired level.