manualshive.com logo in svg

Cobalt Digital Inc 220, Руководство пользователя, Страница: 87 / 104

Поделиться
Скачать
Cobalt Digital Inc 220 Скачать руководство пользователя страница 87

VII

MACERATOR PUMP

A “Y” valve is installed between the pumpout plate and the
macerator discharge seacock. The macerator pump is
located between the “Y” valve and the macerator discharge
seacock. In this configuration all waste is flushed from the
head to the holding tank. The “Y” valve permits you to use
the dockside pumpout feature, or to use the macerator to
pump the waste from the holding tank overboard.

To pump out the holding tank using the macerator pump:

1. Open the discharge seacock.

2. Move the “Y” valve lever to the down or overboard

position.

DO NOT RUN THE PUMP DRY. RUNNING THE PUMP WHEN THERE IS NO WASTE TO

PUMP OUT OF THE HOLDING TANK WILL SHORTEN THE LIFE OF THE PUMP.

3. Activate the macerator pump by turning its switch “ON.”

4. Close the macerator discharge seacock and turn macerator pump “OFF” after the

pumpout is complete.

71

T

ECHNICAL

I

NFORMATION

C

OBALT

B

OATS

- O

WNER

’

S

M

ANUAL

Содержание 220









































































































Отзывы:

Нет отзывов