V001
CLM253
User Manual
48 of 61
Master Unit
CLM253
Connection type: Static IP or DHCP.
IP address: the IP address of the
CLM253
unit inside of the LAN.
Subnet mask
Default gateway
Note: Changing the IP address, subnet mask, default gateway can lead to
failure during the access to the web user interface of the
CLM253
2.5.3.
VLAN
If you enter the NETWORK→ VLAN menu, the screen shown in Picture is displayed:
You can configure the VLAN of
CLM253
in this page. Click the modify button after you
enter the VLAN ID to active the VLAN.
Note: If you active the VLAN of
CLM253
, you should also do some configuration in your
PC to keep the connection between the master and the management PC.
2.5.4.
SNID
The NETWORK→ SNID menu shows the page displayed in Picture
The SNID is the Serial Number Identification number which is used to identify uniquely to
the master unit. If there are several masters placed in the same network, you must set a
different SNID for each master in order to avoid the interference among the master units.
2.5.5.
Filter
The NETWORK→ Filter menu shows the page displayed in Picture.
Picture
41
Picture
42
