www.
coaxlan.de
CLM253
User Manual
V001
Master Unit
CLM253
11 of 61
Manual Authorization
: If this mode is selected, the slave is added to the list of
unauthorized slaves as soon as it is connected to the network through the coaxial
cable. This list is shown in the Unauthorized Slave table.
If a slave is not in the White List cannot use the network. In order to really change the
authorization mode, the Submit button must be clicked.
Note: The authorization process can take until one minute, please wait patiently and click
the Refresh buttons in order to check the current authorization status of the slaves after
changes.
You can do the following operations for each of the slaves included in the Slave
Authorization table:
Enabling/disabling the authorization
:
If you uncheck the Auth Enable checkbox and click the Modify button,
the corresponding slave will be unauthorized and it will be added to the
Unauthorized Slave table (click on the Refresh buttons to update the
status) but it will not be removed from the Slave Authorization table as it is
shown in Picture. If the check the Auth Enable checkbox and click the
Modify button, the corresponding slave will be authorized and it will be
removed from the Unauthorized Slave table (click on the Refresh buttons
to update the status).
Changing the Slave Type
:
The Slave Type is used to identify the slave by the type defined by the
manufacturer (see
2.7.3
). The Slave Type combo box displays a list of type
as shown in Picture . For more information about the available Slave
Types, you can go to the SYSTEM→ SLAVE_TYPE menu. T
he type is usually
detected automatically by the
CLM253
.
Picture
5
