PAGE 3 OF 6
COASTERFURNITER.COM
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
30 MINUTES
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY TIPS:
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
Z-B2 (BOX2) - HARDWARE PACK IS LOCATED IN 300053 (B2)
HARDWARE IDENTIFICATION
1
BOLT
2
3
HALF ROUND NUT
1
(1/4 x 22mm - RBW)
FLAT HEAD
SCREW
(4 x 30mm - RBW)
12PCS
12PCS
26PCS
4
5
WOOD DOWEL
ALLEN WRENCH
(10 x 40mm)
(4 x 57MM - RBW)
8PCS
1PC
6
LONG BOLT
7
8
SHORT BOLT
9
Z-B3 (BOX3) - HARDWARE PACK IS LOCATED IN 300053 (B3)
HALF ROUND NUT
(1/4 x 22mm - RBW)
FLAT HEAD
SCREW
(4 x 30mm - RBW)
2PCS
4PCS
2PCS
26PCS
10
KNOB
11
12
13
WOOD DOWEL
ALLEN WRENCH
(10 x 40mm)
(5/32mm - RBW)
(4 x 57MM - RBW)
1PC
4PCS
4PCS
4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
BOLT WITH WASHER
35
