Coastal Amusements Jacks Hi, Руководство пользователя

Страница: 3 / 28

Page 3
Circuit Breaker
1.0
Commissioning
1.1
Receipt Of Machine
Upon receipt of machine carefully remove all protective packaging and establish machine on a flat
and level floor. Take care to protect the machine from sudden shocks etc. when lifting or
manhandling.
The machine should only be situated indoors, and should not be subjected to any other
environments. Ensure all ventilation grills have at least 4" (100mm) clearance from other surfaces
to permit adequate cooling.
1.2
Electrical Connection
The Jacks Hi machine should be connected to the mains supply via a suitable plug to suit your
installation requirements. Supply entry to the machine is via an IEC 320 style filtered inlet (Ref:
Section 1.3). A competent trained person should always carry this out. If in any doubt, consult a
qualified electrician.
Mains
wiring: Live Black
Neutral White
Earth Green
THIS MACHINE MUST BE EARTHED/GROUNDED
1.3
Electrical Supply Entry
This machine may have the electrical supply connected either at the base or at the very top, as best
suits the location in which the machine is situated. The base feed entry socket is located on the rear
of the machine. The top feed entry socket is located on the top surface of the top sign.
The On/Off switch is a three-position switch, with the central position being ‘Off’. Left and right of
this position are ‘On - Top Feed’ and ‘On - Bottom Feed’ respectively. The main supply circuit
breaker is also located in the same enclosure.
Main Supply Switch & Circuit Breaker
Main Switch