COAST MACHINERY MARSH MASTER 2015 Скачать руководство пользователя | Manualshive

Страница: 3 / 59

background image

MANUFACTURERS LIMITED WARRANTY

MACHINE WARRANTY (Includes Engine and Hydraulics)

Coast Machinery, LLC warrants to the original purchaser, for a period of one (1) full year

from date of delivery, that goods manufactured by Coast Machinery, LLC will be free from
defects of workmanship and materials, provided such goods are operated and maintained in
accordance with Coast Machinery, LLC’s written manuals or other instructions. No warranty is
made with respect to items supplied by Coast Machinery, LLC on special order of purchaser.
Coast Machinery, LLC’s sole obligation is to repair or replace, at Coast Machinery, LLC’s option,
parts that do not conform to this warranty.

LABOR WARRANTY

For one (1) full year from date of delivery, Coast Machinery, LLC, at its option, will repair,

pay for outside service, or pay the customer straight time for the particular warranted repairs.

REPAIR PARTS

Repair parts supplied by Coast Machinery, LLC are warranted for a period of ninety (90)

days from installation. Coast Machinery, LLC’s sole obligation is limited to the replacement of
the warranted part with no obligation to provide labor in installing such part.

ALL ABOVE WARRANTIES DO NOT COVER THE FOLLOWING:



Maintenance items, adjustments, or required maintenance as per written manuals
or other instruction.



Transportation cost of machine for necessary repairs.



Repairs required as a result of failure due to normal wear, accidents, misuse, abuse,
negligence, or improperly installed repair parts.



Products altered or modified in a manner not authorized by Coast Machinery, LLC in
writing.



Provision of substitute equipment or service during periods of malfunctions or non-
use.

This warranty is expressly in lieu of all other stated or implied warranties and of all other

obligations and liabilities on the part of Coast Machinery, LLC, including liabilities for direct,
indirect, immediate, special or consequential damages arising out of the failure of any machine
or part of it to operate properly, including the cost of expense of providing substitute
equipment or service during periods of malfunctions or non-use.

NOTE: This warranty cannot be expanded, changed, or modified by any

representative of Coast Machinery, LLC without written approval from the President
of Coast Machinery, LLC.

«
1
2
3
4
5
...
»

Содержание MARSH MASTER 2015




























































Отзывы:

Нет отзывов

Похожие инструкции для MARSH MASTER 2015

Бренд: Polaris Страницы: 3

KUBOTA RT V 900

Бренд: Legend Страницы: 2

Бренд: Tao Motor Страницы: 77

Бренд: Landoll Страницы: 64

Бренд: Toro Страницы: 2

Бренд: YX Motors Страницы: 159

Evoquip Bison 120

Бренд: Terex Страницы: 224

TRAVEL TRAILER FIFTH WHEEL

Бренд: SkyLine Страницы: 83

Бренд: Open Range Страницы: 88

Бренд: Motrec Страницы: 67

2005 FOURTRAX RANCHER AT TRX400FA

Бренд: Honda Страницы: 286

2005 TRX90 Sportrax

Бренд: Honda Страницы: 207

2001 TRX 250 Fourtrax Recon

Бренд: Honda Страницы: 154

2001 TRX400EX Sportrax 400EX

Бренд: Honda Страницы: 162

2009 SPORTRAX 90X

Бренд: Honda Страницы: 233

2006 TRX500TM Fourtrax Foreman

Бренд: Honda Страницы: 231

2000 TRX250 Fourtrax Recon

Бренд: Honda Страницы: 158

2002 TRX350TM FourTrax 350

Бренд: Honda Страницы: 174

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды