![COAST MACHINERY MARSH MASTER 2015 Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/coast-machinery/marsh-master-2015/marsh-master-2015_operating-and-maintenance-manual_2628507027.webp)
Bring the engine speed up to 1800-2200 rpm.
o
As engine speed comes up, you will see the hydraulic pressure rise on the cutter
gauge.
o
It will level out at 500-800 psi depending upon fluid temperature.
The relief is set at 3500 psi, but do not let it run continuously if it reaches this point.
The MM-2C-LH model does not have a 3-point hitch; therefore it is not capable of running a cutter.
The cutter control box found in the above mentioned models is not found in the MM-2C-LH model. The
key switch that controls the high-flow circuit is located on the left side of the instrument panel. Simply
turn the switch to “on” to run the high-flow circuit.