Coalbrookdale REMBRANDT 18G/L, Руководство пользователя

Страница: 7 / 29

Dear Customer,
Your gas fire must be installed by a competent person
(e.g. A Corgi Registered Installer) in accordance with the
Installation Section of the Owners Manual and operated
in accordance with the Users Guide, if so it should
provide many years of safe operation.
Please complete the separate guarantee card and return
to use within 28 days of purchase. This will enable us to
record the details of your purchase and keep you advised
of any future developments.
We thank you for purchasing our product and trust it will
provide many years of excellent service.
The components of this appliance are guaranteed for one
year. We agree to repair free of charge, or, at our option,
replace the appliance or part thereof which may prove to
be defective within one year of purchase.
Please retain your purchase receipt. Our Service Engineer
will need to see this in the event of a claim under
warranty.
Your Coalbrookdale Rembrandt 18G/L Gas Fire is a natural
or propane gas fire.
Due to the newness the appliance may give off a slight
smell for a short period after commissioning. This is quite
normal and will disappear after a few hours of operation,
open door and windows if required.
The installation of the appliance must be carried out by a
competent person (e.g. CORGI Registered Installer), in
accordance with the installation section of this Owners
Manual and the current Gas Safety (Installation and Use)
Regulations 1998 (as amended). Failure to install the
appliance correctly could lead to prosecution.
Permanent ventilation must be provided into the room
where the appliance is sited. This must be 100cm
2
MIN.
Before installation of your fire the installer should check
that the chimney is sound, free from obstruction and
clean. If a brick chimney is to be used for the gas fire it
MUST be swept prior to the installation.
The hearth under the appliance should never be covered
with combustible flooring or material. Do not obstruct the
space beneath the appliance.
The Coalbrookdale Rembrandt 18G/L Gas Fire has been
designed similar to a solid fuel fire to relevant safety
standards, but during use many parts of the appliance can
become
HOT to touch. We recommend that you provide
and secure a fireguard complying with BS. 6539 when the
room is used by elderly, infirm or young persons.
Any alteration after the initial installation must be in
accordance with the requirements of the Installation and
Servicing Sections of this manual. Clarification of
combustible material clearances, hearth dimensions and
fluing requirements are detailed in the sections ‘Location
and the Flue’.
The chimney should be checked on a regular basis to
ensure continued clearance of combustion products and
that there is no accumulation of debris or soot etc. It is
recommended that the appliance is inspected/serviced
annually by a competent person (e.g. A CORGI
Registered Installer).
Combustible furniture or material
MUST NOT
be placed
closer than 1m in front of the appliance.
It is NOT recommended to have any materials, such as
curtains, above the appliance or to within 1m at the sides.
Clothing or other flammable material should NOT be
placed on the appliance.
Blown vinyl wallpaper or similar materials which have a
raised pattern are easily affected by heat, so that it may
scorch or become discoloured close to a heating
appliance. Please bear this in mind when installing the
appliance and when re-decorating.
The appliance should under NO circumstances be utilised
for solid fuel.
PLEASE NOTE: The pilot and flame sensing device fitted
to this fire also acts as an oxygen level sensing device
which shuts off the appliance, if the evacuation of the
products of combustion is interrupted.
If the fire shuts off, restart the main burner as stated in
the section ‘TO LIGHT THE PILOT’. If the appliance fails
to relight or repeatedly cuts off, then do not use and
inform a qualified person.
GUARANTEE
IMPORTANT NOTES
6